with double cone Simply Secure Seal

LAMPE Sewer Sealing Cushions with double cone

tl_files/lampegmbh/047korr_auss_seite2KLEIN.jpg

tl_files/lampegmbh/kanaldichtkissen_pdf01.jpg

tl_files/lampegmbh/kanaldichtkissen_pdf02.jpg

tl_files/lampegmbh/kanaldichtkissen_pdf04.jpg

LAMPE Sewer Sealing Cushions with double cone, the alternative to conventional pipe plugs, sewer plugs or other pipe stoppers!

Unique advantages and benefits

LAMPE sewer sealing cushions instead of normal pipe plugs and sewer plugs are fixing themselves in clean pipes. Thus you are saving time and money!
LAMPE sewer sealing cushions are highly resistant against ageing. We can prove a lifetime of more than 30 years. Further the devices are well resistant against chemicals. Therefore they must not always be replaced or exchanged. Which conventional sewer plug or pipe stopper can offer this advantage too?
LAMPE sewer sealing cushions are repairable. You don’t have to buy each time a new device in case a cushion should have been damaged, like you have to do, if you are using conventional pipe plugs or normal pipe stoppers.
All devices can tightly be folded and are low of weight. Even the big devices of the type 1-2200 fit well into each common manhole between 600 and 630mm. This makes the work more simple, faster and thus more efficient. LAMPE-sewer sealing cushions shut all profiles, also egg, kite and mouth profiles and rectangular channels. Even pressure tests in special profiles with dry-weather ditch can be performed without any problem a expanding. Purchasing of special-formed rubber pipe plugs and sewer plugs will not longer be necessary.
One device shuts many different diameters. For example our type 1-1400 shuts all pipes from 500 to 1400mm. You do not need a big quantity of several conventional pipe plugs or pipe stoppers. You only need a few devices and you will always have the right shut-off device at hand.
When performing pressure tests, the LAMPE sewer sealing cushions with special sealing can shut off the inspection area completely against air and gas. This trick will never work with an expanding sewer plug or pipe stopper.

Quality and Safety - tested and certified.

You can rely on that.

LAMPE Sewer Sealing Cushions: the better pipe and sewer plugs!!!

tl_files/lampegmbh/GS gross 2 klein6.jpg

Standard product range with 1 bar working-pressure (5m waterhead back-pressure or 0,2bar airpressure or vacuum):

Type designation	Ø from	Ø up to	basic device	with special sealing	with bypass	with bypass & special sealing
	Field of application		Art. No.:
1-150	80 mm	150 mm	76311 basic device only to stop the water flow, from: Ø 80-150 mm weight: 0,9 kg	76312 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 90-150 mm weight: 1 kg	-	-
1-400	100 mm	400 mm	76326 basic device only to stop the water flow, from: Ø 100-400 mm weight: 1,9 kg	76327 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 150-400 mm weight: 1,93 kg	76328 with bypass: with ability to accomplish water trough the cushion, from: Ø 100-400 mm weight: 3,55 kg	76329 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76327 from: Ø 150-400 mm weight: 3,6 kg
1-600	200 mm	600 mm	76336 basic device only to stop the water flow, from: Ø 200-600 mm weight: 3,9 kg	76337 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 250-600 mm weight: 4,1 kg	76338 with bypass: with ability to accomplish water trough the cushion, from: Ø 200-600 mm weight: 11,8 kg	76339 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76337 from: Ø 250-600 mm weight: 12 kg
1-800	300 mm	800 mm	76341 basic device only to stop the water flow, from: Ø 300-800 mm weight: 8,6 kg	76342 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 300-800 mm weight: 9,5 kg	76343 with bypass: with ability to accomplish water trough the cushion, from: Ø 300-800 mm weight: 18,8 kg	76344 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76342 from: Ø 300-800 mm weight: 19,5 kg
1-1000	400 mm	1.000 mm	76346 basic device only to stop the water flow, from: Ø 400-1000 mm weight: 11,8 kg	76347 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 400-1000 mm weight: 12,4 kg	76348 with bypass: with ability to accomplish water trough the cushion, from: Ø 400-1000 mm weight: 23,7 kg	76349 with bypass special sealing: for pressure test DIN 1610, in combination with Art. 76347 from: Ø 400-1000 mm weight: 24 kg
1-1200	500 mm	1.200 mm	76351 basic device only to stop the water flow, from: Ø 500-1200 mm weight: 14,5 kg	76352 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 500-1200 mm weight: 15 kg	76353 with bypass: with ability to accomplish water trough the cushion, from: Ø 500-1200 mm weight: 28,5 kg	76354 with bypass special sealing: for pressure test DIN 1610, in combination with Art. 76352 from: Ø 500-1200 mm weight: 29,2 kg
1-1400	500 mm	1.400 mm	76356 basic device only to stop the water flow, from: Ø 500-1400 mm weight: 25,2 kg	76357 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 500-1400 mm weight: 27,9 kg	76358 with bypass: with ability to accomplish water trough the cushion, from: Ø 500-1400 mm weight: 41,5 kg	76359 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76357 from: Ø 500-1400 mm weight: 44,2 kg
1-1500	500 mm	1.500 mm	76365 reason for the shut-off device for Ø 500-1500 mm weight: 28,8 kg	76366 for absolute tightness, strongly recommended for special profiles for Ø 500-1500 mm weight: 29,8 kg	76367 with the possibility of water through the pillow to lead for Ø 500-1500 mm weight: 45,1kg	76368 for leakproofness samples DIN EN 1610 with conjunction Art. 76366 for Ø 500-1500 mm weight: 47,8 kg
1-1600	600 mm	1.600 mm	76361 basic device only to stop the water flow, from: Ø 600-1600 mm weight: 38,5 kg	76362 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 600-1600 mm weight: 41,8 kg	76363 with bypass: with ability to accomplish water trough the cushion, from: Ø 600-1600 mm weight: 56,7 kg	76364 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76362 from: Ø 600-1600 mm weight: 58,5 kg
1-2200	1.000 mm	2.200 mm	76376 basic device only to stop the water flow, from: Ø 1000-2200 mm weight: 86 kg	76377 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 1000-2200 mm weight: 90,4 kg	76378 with bypass: with ability to accomplish water trough the cushion, from: Ø 1000-2200 mm weight: 105 kg	76379 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76377 from: Ø 1000-2200 mm weight: 109,4 kg
1-2800	1.500 mm	2.800 mm	76391 basic device only to stop the water flow, from: Ø 1500-2800 mm	76392 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 1500-2800 mm	76393 with bypass: with ability to accomplish water trough the cushion, from: Ø 1500-2800 mm	76394 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76392 from: Ø 1500-2800 mm
1-3000	1.600 mm	3.000 mm	76395 basic device only to stop the water flow, from: Ø 1.600-3.000 mm	76395 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 1600-3000 mm	76395 with bypass: with ability to accomplish water trough the cushion, from: Ø 1600-3000 mm	76395 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76395 from: Ø 1600-3000 mm
1-3200	1.800 mm	3.200 mm	76396 basic device only to stop the water flow, from: Ø 1.800-3.200 mm	76397 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 1800-3200 mm	76398 with bypass: with ability to accomplish water trough the cushion, from: Ø 1800-3200 mm	76399 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76397 from: Ø 1800-3200 mm
1-3600	2.200 mm	3.600 mm	76381 basic device only to stop the water flow, from: Ø 2200-3600 mm weight: 216 kg	76382 with special sealing: for absolute tightness, absolute recommend for special-profiles, from: Ø 2200-3600 mm weight: 224 kg	76383 with bypass: with ability to accomplish water trough the cushion, from: Ø 2200-3600 mm weight: 245 kg	76384 with bypass & special sealing: for pressure test DIN 1610, in combination with Art. 76382 from: Ø 2200-3600 mm weight: 253 kg

New: All Cushions up to 1000mm can be delivered as devices with 2 bar working-pressure and 10m waterhead back-pressure!

Type designation	Ø from	Ø up to	basic device	with special sealing	with bypass	with bypass & special sealing
	field of application		Art.-No.
2-150	80 mm	150 mm	76411 basic device only to stop the water flow, from: Ø 80-150 mm	76412 Für absolute Dichtheit, dringend empfohlen für Sonderprofile für Ø 90-150 mm	-	-
2-400	100 mm	400 mm	76426 Ø 100-400 mm	76427 Ø 150-400 mm	76428 Ø 100-400 mm	76429 Ø 150-400 mm
2-600	200 mm	600 mm	76436 Ø 200-600 mm	76437 Ø 250-600 mm	76438 Ø 200-600 mm	76439 Ø 250-600 mm
2-800	300 mm	800 mm	76441 Ø 300-800 mm	76442 Ø 300-800 mm	76443 Ø 300-800 mm	76444 Ø 300-800 mm
2-1000	400 mm	1.000 mm	76446 Ø 400-1000 mm	76447 Ø 400-1000 mm	76448 Ø 400-1000 mm	76449 Ø 400-1000 mm

Attention!

For the proper operation of our sewer sealing cushions it is absolutely necessary to use our original accessories: Safety fitting 1 bar Art. 71427, filling hose e.g. 5 m Art. 71523 as well as accessory for the primary pressure (e.g. pressure reducer). The use of any other foreign filling-equipment is forbidden, because of the different working-pressures of other pipe plugs and pipe stoppers!